Your Cart (0)
Thumbnail Filmstrip of Polar Guide Shaft - 115 EL & 115 EMC Images
Guide shaft or guide rod for the center of the pull arm on Polar 115EL and early Polar 115 EMC (up to 1984) paper cutters(GS 352).
The early Polar 115 EMC cutters are the ones that use 2 shear bolts in the pull arm.
The later 115EMC cutters (after about 1984) have a single center shear bolt and use our Guide Rod part number 7250106.
This 14mm diameter alignment rod fits up the middle of the pull arm to prevent it from flapping around and causing damage when the shear bolt breaks. It is made from centerless ground drill rod for maximum toughness. Overall length is approximately 15" long. (221717)
The early Polar 115 EMC cutters are the ones that use 2 shear bolts in the pull arm.
The later 115EMC cutters (after about 1984) have a single center shear bolt and use our Guide Rod part number 7250106.
This 14mm diameter alignment rod fits up the middle of the pull arm to prevent it from flapping around and causing damage when the shear bolt breaks. It is made from centerless ground drill rod for maximum toughness. Overall length is approximately 15" long. (221717)
