Polar Shear Bolt -Early 107

Steel Shear Bolt for the early Polar 107 Paper Cutters, up to serial number 611352. (208939, 220575, S114)

The main shank on this hex head shear bolt or shear pin is 10mm in diameter and it is 65mm (2-9/16") long below the head.

It has an M10 thread and has a cross hole drilled through the shank at the break point.

Included with each of these shear pins is a mating hex nut (208940).

The nut, as well as the hex head, measure 17mm (.67") across the flats.

Note that the later Polar 107 cutters (after serial number 611352) use a larger shear bolt or safety bolt which measures 12mm in diameter but are also 65mm long.

See our part number 7250168 for this larger shear bolt for the later cutters.