20 Continuous

Features:

*Forward and reverse drive on feeder
*Optical lead edge sensor
*Patented front blow design
*Combination fold plate design in lower position
*Positive, non-slip, helical gear drive
*Built-in batch and total counter
*Low profile ergonomic top feed table height
*Exclusive adjustable, removable slitter shafts
*Combination folding rollers
*Sealed ball bearings
*Computerized sheet gap control
*Diagnostic messages displayed
*Capable of adding optional BAUM Ifold

The Baum 20 Continuous Feeder features sturdy, solid-steel frame construction and an exclusive drive system with both forward and reverse direction for easier loading and unloading. Front and side air blow are standard to provide complete separation and floatation on all stocks. The low profile top board design makes loading easier, with less operator fatigue and a high loading capacity. Make-ready time is reduced using the patented “Easy-Set” front blow bar and the unique leading-edge sheet sensing device.

Specifications:

Maximum Sheet Size: 20.5 x 33 in. (52 x 84cm)
Minimum Sheet Size: 4 x 6 in (10.16 x 15.24 cm)
Electrical: 220/3/60 or 380-415/3/50
Maximum Folder Speed: 8200 Inches per min (208.3 m/min)